Handling improvement for off-road vehicle
In this project, a full vehicle model for an off-road vehicle was built in ADAMS/Car in order to improve steering effort based on suspension characteristics.
Investigation of roll-over crashworthiness of an intercity coach under ECE R66
In this project, the chassis of an intercity bus was investigated under ECE R66. First, the entire bus was modeled in ADAMS/View including all passengers modeled as lumped masses.
LS-PrePost is an advanced pre and post-processor that is delivered free with LS-DYNA. and is available for download.
Thermal Welding of an Oil Tank
In this project a TIG welding simulation has been simulated on an aluminum (5052 - H32) oil tank with very small thickness. The minimum and maximum thicknesses were 1mm and 5mm respectively. The aim of the simulation was to determine the residual stress in the tank after TIG welding.
Design and Analysis of 6-DOF Thermal Micro Actuator
In this project, a thermal micro actuator has been geometrically design based on various boundary conditions (Thermal, displacement and voltage boundary conditions on the end of each edge).
Numerical Simulation of Monotonic/Cyclic Load History on Steel Frame
In this Project, a constant bolted frame were modeled which the location of the center joint between internal links, varied considerably. The finite element analysis were performed to consider the amount of total displacement in accordance with the center joint location.
Rig Stress Analysis
Stress analyses due to several boundary conditions have been performed on an oil digging rig to evaluate the effects of operational forces on the rig structure.
ANSYS Training Syllabus by Javad Mehrmashhadi
Electromagnetic Forming (EMF)
How To Simulate a Friction Stir Welding with ANSYS
Written by Javad MehrmashhadiFriction Stir Welding (FSW) is a solid-state welding technique that involves the joining of metals without filler materials. A cylindrical rotating tool plunges into a rigidly clamped workpiece and moves along the joint to be welded.