Javad Mehrmashhadi is the owner of CAE-Solutions.
I Performed an explicit simulation of a hot forging process of a screwdriver with no temperature change. The material was plastic kinematic for the piece work and the dies were considered as rigid parts.
In this project, a new generation of foam has been used in Paykan bumper to evaluate the pedestrian injury.
In this project I am asked to determine the sufficient stiffness for a new designed rear seatbelt anchorages in Samand BIW in order to meet the requirement of ECE R14.
residual stresses on welding lines of a tube formed by spiral forming have explicitly determined in LS-Dyna.
The strength of seat rails of Peugeot 206 has been evaluated in sled test simulation in this project.
In this project, I checked the performance of current Iranian guardrail to absorb energy in crash accidents.
In this project, a network of steel rebar was considered as concrete reinforcement in order to improve its energy absorption capacity under impact of a rigid body.
The amount of tsunami forces on large intercity bridges is investigated in this project. LS-Dyna explicit code has been employed for this research.