CAE-Solutions - Electromagnetic Forming (EMF)

Electromagnetic Forming (EMF)

Post by: Javad Mehrmashhadi

03/06/2015

Category: Other Projects

1464 views

In this project, an electromagnetic forming simulation was performed.

A cylinder with diameter of 24mm and length of 50mm has been exposed to 4KV charge and forming process has been investigated in an Electric-Magnetic-Structural coupled analysis within 100 micro seconds.

One of the prominent step during the simulation was to find EMF forces in ANSYS during a linear analysis and to apply them in LS-Dyna for an explicit non-linear analysis.

Some of the results can be seen in the following pictures.


Finite Element model (Air elements, Electric Circuit, Coil, Work piece and Die)	The Amount of generated current in order to build electro-magnetic force.
The Amount of generated current in order to build electro-magnetic force. The maximum current has been happened in 45micro seconds.	Structural deformation due to Electro-magnetic force

Share this article

About Author

Javad Mehrmashhadi

Javad Mehrmashhadi is the owner of CAE-Solutions.

Latest Simulations

cache/resized/fd3df9be4f4655648bcbab5d820bff94.jpg

Waterjet cutting simulation using ALE simulation

11/06/2015 0 comment

In this research project, a deep hole was created in a piece work using water and abrasive material inside it. The ALE algorithm has been employed ...

Spiral Forming Simulation

09/06/2015 0 comment
Forging Simulation

09/06/2015 0 comment

cache/resized/b386bff73369d452ad2f7ad1d5384493.jpg

Investigation of Tsunami Force on Superstructure Using Explicit Code

11/06/2015 0 comment

The amount of tsunami forces on large intercity bridges is investigated in this project. LS-Dyna explicit code has been employed for this research.

Explicit Impact Simulation of Concrete Confined With a Network of Rebar Steel

09/06/2015 0 comment
Study on Different Soil Explosion Resistance

09/06/2015 0 comment

cache/resized/cd30d866ba0c8c94386d3dce48711645.jpg

Design and analyze a wind damper for space shuttle

04/06/2015 0 comment

In this project, a single-point mechanism was theoretically designed and checked its functionality in MSC.ADAMS in order to damp the wind forces in ...