CAE-Solutions - Waterjet cutting simulation using ALE simulation

Waterjet cutting simulation using ALE simulation

Post by: Javad Mehrmashhadi

11/06/2015

Category: Other Projects

1653 views

In this research project, a deep hole was created in a piece work using water and abrasive material inside it. The ALE algorithm has been employed and the simulation has been done with LS-Dyna.

A small size of the piece work has been selected with NON-REFLECTION boundary condition.


Finite element model of the problem	Animation of making deep hole with water and abrasive

Share this article

About Author

Javad Mehrmashhadi

Javad Mehrmashhadi is the owner of CAE-Solutions.

Latest Simulations

cache/resized/fd3df9be4f4655648bcbab5d820bff94.jpg

Waterjet cutting simulation using ALE simulation

11/06/2015 0 comment

In this research project, a deep hole was created in a piece work using water and abrasive material inside it. The ALE algorithm has been employed ...

Spiral Forming Simulation

09/06/2015 0 comment
Forging Simulation

09/06/2015 0 comment

cache/resized/b386bff73369d452ad2f7ad1d5384493.jpg

Investigation of Tsunami Force on Superstructure Using Explicit Code

11/06/2015 0 comment

The amount of tsunami forces on large intercity bridges is investigated in this project. LS-Dyna explicit code has been employed for this research.

Explicit Impact Simulation of Concrete Confined With a Network of Rebar Steel

09/06/2015 0 comment
Study on Different Soil Explosion Resistance

09/06/2015 0 comment

cache/resized/cd30d866ba0c8c94386d3dce48711645.jpg

Design and analyze a wind damper for space shuttle

04/06/2015 0 comment

In this project, a single-point mechanism was theoretically designed and checked its functionality in MSC.ADAMS in order to damp the wind forces in ...