In this Project, a constant bolted frame were modeled which the location of the center joint between internal links, varied considerably. The finite element analysis were performed to consider the amount of total displacement in accordance with the center joint location.
1. The bolt was model with MPC184 and the material was chosen to be elastic plastic with tangent modulus.
2. With regard to symmetric boundary conditions, the half model were considered for the project.
3. No contact were defined due to insignificant penetration.
|
|
|
|
Model 1 |
Model 2 |
|
|
|
|
Other carried out study in this field |
A contour plot for one study |
I have been doing simulation support on variety of projects within automotive and aerospace industries as well as on civil projects since 2004. Regarding my CAE skills using LS-Dyna, ANSYS, Altair Hyperworks and ADAMS I am well able to perform simulations on the following areas: |
|
Please contact me if you need technical support in your projects by sending your request to mehrmashhadi@gmail.com Javad Mehrmashhadi |
 |
English
